A trace moisture analyser for corrosive gases
TMA
P2O5 sensor
ATEX zone 1
suitable for use in chlorine & HCL
A P2O5 trace moisture analyser
This analyser allows accurate measurement of trace water content in corrosive and aggressive gases. Where most other sensors would rapidly lose sensitivity, the P2O5 sensor in the TMA is designed for extended use in gases like chlorine, HCl or H2SO4.
GENERAL |
||||
|
Measurement |
Humidity in gases |
|||
|
Configuration |
On-line |
|||
|
Ranges |
0.01 to 10 ppm/v 0.1 to 100 ppm/v 1 to 1000 ppm/v 2.5 to 2500 ppm/v 5 to 5000 ppm/v (service) |
|||
|
Accuracy |
± 1% fs |
|||
|
Reproducibility |
0.1 % fs |
|||
|
Response time |
< 1 second |
|||
|
T50 |
< 8 seconds |
|||
|
Sensitivity |
± 0.1 % fs |
|||
|
Gas flow |
20 sl/h optional 100 sl/h |
|||
|
Recommended gas-pressure |
0.1 to 0.5 barg |
|||
|
Gas temperature |
+5 to + 150 °C |
|||
|
Operating temperature of analyser |
- 10 to + 50 °C |
|||
|
Ambient temperature for probe |
+ 5 to + 65 °C |
|||
|
Display |
LC-multifunctional |
|||
Certification |
||||
|
European |
CE marked |
|||
Shipping |
||||
|
Shipping weight |
6 Kg |
|||
MECHANICAL |
||||
|
Dimension |
Analyser: 160 H x 257 L x 316 D mm Sensor: 120 H x 40Ø mm |
|||
|
Sensor cable |
2 m (max. 300 m on request) |
|||
|
Gas connections |
6 mm Swagelok® (optional 1/4 " pipe-fitting Swagelok®) |
|||
|
Glass-housings |
6 mm tube-connection |
|||
ELECTRICAL / UTILITIES |
||||
|
Power voltage |
230 V or 50 Hz (110 V) |
|||
|
Power consumption |
8 W |
|||
|
Input |
5 contacts (for ext. range switching) |
|||
Outputs |
||||
|
Serial port |
RS232 Modem |
|||
|
Digital output 1 |
-2 volt free relays for alarm (max. 230 V / 1 A) |
|||
|
Digital output 2 |
-5 volt free relays for range identification |
|||
|
Analogue outputs with range identification |
0 to 20 mA (<500 Ω) 4 to 20 mA (<500 Ω) 0 to 10 Vdc (>100 kΩ) |
|||
|
All specifications subject to change |
||||
CALCULATORS AND CONVERSION CHARTS:
TECHNICAL BULLETINS:
DATASHEET: