Oil in water analyser with spectrometer and insertion probe

oil in water analyser with probe EX1000P

Request a quote
Download a datasheet
Share this page

Share |

Close
Send to a friend

Use the form below to send a link to this page

Recipient's email address*:

Your forename*:

Your surname*:

Your email address*:

* Indicates a required field

Close

EX-100P2-1000P2

direct insertion probe
automatic ultrasonic cleaning
fast speed of response

Improved oil in water measurements.

Significant steps have been taken to improve oil in water measurements. Systems from Advanced Sensors have been able to operate in the field for many years with zero maintenance. The EX-100P2 determines oil in water concentration from low ppb to 20,000 ppm in two process streams simultaneously, to monitor water pollution. In addition to the features of the EX-100P2, the EX-1000P2 can automatically determine the type of oil that is being detected.

The use of an automated ultrasonic cleaning method allows the EX-100P2 and the EX-1000P2 to provide reliable and accurate measurements for many years without requiring maintenance or consumables, making the operating costs for these systems extremely low. Many users have reported zero maintenance over several years.

With the integral spectrum analyser, the EX-1000P2 logs data once a second and has sufficient storage for 10 years of data that can be displayed quickly and easily on the graphical user interface. The system is able to determine oil types, or if other species are present in the water.

Another unique feature of the EX-1000P2 is the ability to correct for different oil types. The individual spectrum for different oils can be determined by the spectrometer, and correct measurement calibration can then be applied to report an accurate oil in water ppm level.

Download Oil in water product range brochure

GENERAL
Measurement	Oil in water
Measurement principle	UV fluorescence
Configuration	In-line probe
Range	0 to 3,000 or 20,000 ppm_v
User may select a range from 0 to 10 ppb to 0 to 20,000 ppm
Cleaning	Automatic ultrasonic
Analogue output	4 to 20 mA passive
Accuracy	± 1 % of measurement range
Repeatability	> 99 %
Response time	< 1 second, continuous results
Process temp. range	0 to 100 °C (option to 180 °C)
Ambient temp. range	-20 to 60 °C
Display	Interactive touch screen
Certification
European	CE marked
Ingress protection	IP66 (probe sensor IP68)
ATEX/IECEx	Exd II 2G IIB T4
CSA	Class 1 Div 1
Shipping
Shipping Weight	Approx. 77 Kg including stand, valve and chamber
MECHANICAL
Dimension	1120 H x 600 W x 640 D mm (optional variants)
Clear space	500 mm front and rear
Material (wetted parts)	316 SS (option of hastalloy, inconel, CR25, CR 22, titanium, monel)
ATEX enclosure	Aluminium (316SS optional)
Pressure to cell	0 to 35 BarG (design pressure 180 BarG)
Sample flow rate	0 to 10 m/s
Ingress protection	IP66
Hot insertion/extraction	Optional
Process fitting	2" ANSI flange standard
ELECTRICAL/UTILITIES
Power voltage	110 or 230 VAC
Power frequency	50 or 60 Hz
Power consumption	60 W normal, 300 W peak
Outputs
Current	4 to 20 mA passive (modbus over HART optional)
Alarm relay	1 off volt free relay configurable to system alarm or ppm setpoint
Digital 1	Ethernet
Digital 2	2 wire ADSL
Wireless	Wi-fi (optional)
Remote access	VNC, master remote manager
Internal data storage	> 10 years
All specifications subject to change